USG Durock™ EcoCap™
• 6,000-7,000 psi (41.4-48.3 MPa)
• Concrete & wood subfloors
USG Durock™ Multi-Use
• 3,500-4,500 psi (24.1-31.0 MPa)
• Wood frame, renovation & light commercial construction, radiant heat installations
USG Durock™ ProFlow™
• 6,000-8,000 psi (41.4-55.2 MPa)
• Commercial, institutional & renovation construction
USG Durock™ Quik-Cover™
USG Durock™ Quik-Top™ Series
USG Durock™ Speed™
USG Durock™ Surface™
USG Durock™ UltraCap™
USG Durock™ Pro Series
USG Levelrock® Pre-Pour™ Liquid Underlayment
- 2,000 – 3,200 psi (13.8 – 22.0 MPa)
- Underneath tubs & in chase wall areas
USG Levelrock® 2500 Series
USG Levelrock® 3500 Series
USG Levelrock® 4500 Series
USG Levelrock® Commercial RH Series
USG Levelrock® RH Series
USG Levelrock® CSD® Early Exposure™ Series
USG Levelrock® UltraArmor™ Series
Low Prep Underlayments
Prime and pour. In just two steps, USG Durock™ Low-Prep Underlayments provide Strength Beneath the Surface™ featuring compressive strengths that exceed those of conventional concrete.
Fiber-Reinforced (FR) Underlayments
How do you improve USG underlayments? By reinforcing them. USG Fiber Reinforced (FR) engineered cementitious underlayments are cost-effective reinforcement solutions that provide a smooth surface with improved impact resistance, enhanced crack reduction and further propagation reduction, and improved load distribution.
When time is of the essence, consider USG Fast Track products for quick return to service.
Properly poured and dried underlayments that can be used as a wear surface with an appropriate coating.
High Recycled Content
USG Levelrock Green floor underlayments are made with recaptured gypsum via a process that greatly reduces emissions of sulfur dioxide which helps reduce harmful acid rain. This use of recaptured gypsum also eliminates the need to dispose of the material in landfills as a solid waste. USG Durock™ EcoCap™ Self-Leveling Underlayment contains 75% recycled content in the cementitious binder and USG Durock™ EXG™ Concrete Repair Patch contains 65% recycled content in the cementitious binder.
UL Classified in 135+ assemblies. All USG 1- and 2-hour rated floor assemblies are designed to meet the International Building Code (IBC) and feature USG Levelrock® and USG Durock™ gypsum-based underlayments and floor patches.
USG product achieved GREENGUARD Gold Certification and qualifies as a “Low Emitting” material per California Department of Public Health CDPH/EHLB/Standard Method (CA Section 01350) for school classroom, single-family residence and private office modeling scenarios, and meets USGBC’s LEED® v4 emission requirements.
For large scale projects, adding approved sand onsite to USG Durock™ Pro Series Self-Leveling Products creates less waste and yields significant material savings. In addition, only minimal surface preparation is required for most products.